Updates and support
Poxycon Wood
-
- filling, gluing and repairing
- structural and decorative applications
- very well mouldable
- can be treated as wood after curing
Novapox Wood was developed for both structural as well as decorative repairs of affected wooden beams, window-frames, sculptures, ...
Novapox Wood is a ready for use two component epoxy resin paste that can be moulded well.
Novapox Wood has mechanical features comparable to the ones of wood and is therefore as mouldable as wood: sawing, drilling, sanding, carving,...
Novapox Wood is weather-resistant.
Novapox Wood can be painted with any kind of wood and can be scrubbed and polished.
Novapox Wood has a good adhesion to most kinds of wood with a completely shrink free curing.
A repair with Novapox Wood is reversible: when heated up to + 120°C the mass gets weak and loosens from the surface.
Preparation
Only apply to a dry surface which is free from loose parts, paint, dust or affected wood. If necessary the surface can be strengthened with Novatio Fixapox (thin fluid epoxy resin with a high penetration capacity)
Processing
Mixing ratio 1:1 volume or weight
Mix until you obtain a homogeneous colour. The colour can be changed by adding pigments.
Apply with a filling knife or spatula and press it into the crack or damaged area.
The repair can be treated or painted after 24 hours.
Clean the tools with Megaclean or Nova Wipe.
Composition
- Component A: pure epoxy resin
- Component B: wood powder with fibrous and cellular fillings
Specific gravity: more or less 1,37 kg/cm³
Fix components: 100%
Mixing ratio: 1:1
Processing temperature: min + 7°C/ Max + 30°C
Pot life: (at 20°C) 30 min
Curing: 24 hours
Compression strength: 35N/mm²
Tensile strength: 8N/mm²
The adhesion to dry wood is better than the cohesion of the wood.
| Article number | Name | Package | Content | Unit | Category | Certificates and safety information |
|---|---|---|---|---|---|---|
| 621101000 | Poxycon Wood (A+B component) | set (2 pièces) | 1,5 | kg | Epoxies and coatings |