Updates and support
Megapox
-
- Pure 2-component epoxy resin.
- Due to its simple 2/1 mixing ratio MEGAPOX is suitable for small or large repairs.
- Personally determined viscosity.
- Wear-resistant - non-shrinkable - elastic.
- Resistant to chemical products and oil derivates.
- Can be used for impregnation, filling, coating, moulding, bonding, sealing, clamping and and binding.
- Ideal to make antiskid surfaces.
MEGAPOX is a pure epoxy resin with multifunctional possibilities. It can be used as adhesive, floor covering, to repair floor
and concrete, sealing compound, injection, filler, impregnating agent and moulding material.
- MEGAPOX is packed in the right weight ratio. Before using the 2 components have to be mixed in the proportion of 2 to 1 (e.q. 2 x1 cup A and x 1 cup B).
- After this, mix thoroughly until you get a smooth substance. The resin is now ready for use.
- !!! Attention: shiny surfaces have to be roughened first to improve the adhesion.
- I. Adhesive: Universal glue for the adhesion of wood, stone, metal, glass, ceramic materials.
- MEGAPOX has to be mixed with MEGATIX thickener until the desired consistency, to apply on one side or by filling up, can also be used for laminating.
- II. Floor covering: - acid resistant joint-free floor covering.- wear-resistant floor mortar, to make anti-skid surfaces.
- To mix with MEGAFIL or MEGAGRAIN.
- Mixing ratio resin-sand : 1/1: mouldable floor of to 3 mm; 1/4: mortar to apply from 5 to 15 mm.
- By adding MEGATIX the mixture becomes eaesier to process.
- III. Floor and concrete reparation: excellent adhesive for floor reparation, stronger than concrete.
- First apply one layer of pure resin with a brush, apply the mortar on the still wet
resin, (see item II).
- IV. Sealing compound-filler: - Acid resistant sealing compound for the chemical. Excellent adhesion hard and impact-proof filler for difficult repairs.
- Mixing MEGAPOX with a little Megatix and fill with a little powder (cement, plaster, wood flour, iron or aluminium powder).
- V. Impregnating mass: Impregnation of concrete, Asbest cement, brickwork or wood to make it water-, weather- and acid resistant. Spread out MEGAPOX on a dry surface, consumption of +/- 250 g/m². In case of higher requirements of impermeability of chemical resistance, apply 2 wet layers of MEGAPOX. By need of antitskid, chip the still wet surface with a desired grain (MEGAGRAIN, MEGAKWARTS or MEGAGRIP).
- After hardening remove the superfluous grain.
- VI. Moulding material: moulding shapes, clamping, securing machines to a base, encapsulating electric components.
- Never apply pure MEGAPOX in layers thicker than 1 cm. For larger objects always fill MEGAPOX with a powder (cement, MEGAFIL, plaster, sawdust).
Composition: 2 components (A-resin - B-hardening agent).
Colour: honey, transparent.
Specific gravity: 1 kg/I +/- 0.1.
Pot life (after mixture): 30 to 45 minutes at 15°C.
Tear strength: +/- 32N/mm².
Tensile strength: depending on the filler 50 to 90 N/mm².
Processing temperature: from +10°C to +35°C.
Temperature durability: +/- 100°C.
Hardening time: after 6 hours: hard; after 20 hours: may be walked on; after 7 days: chemical charge Solvent %: 0% shrink proof.
Electrical resistance: 1015Ohm/cm.
Chemical resistance: resistant to sustained contact to strong acids, leach, oil, grease, petrol, solvents, smog, sea air.
Cleaner/diluent: MEGACLEAN.
Thicken: MEGATIX neutral thickener for epoxy resin.
Content: component A = aliphatic amine; component B = Bisphenol A-Diglycedyl-ether N-Butylglycedylether.
Shelf life: 12 months, keep dry, cool and frost-proof.
Safety measures: consult the Safety Data Sheet.
| Article number | Name | Package | Content | Unit | Category | Certificates and safety information |
|---|---|---|---|---|---|---|
| 621009000 | Megapox set (A+B) | 1,5 | kg | Epoxies and coatings |